Accentra Pellet Stove
Harman - Pellet Stoves
The Harman Accentra Pellet Stove is a high performance pellet stove with beautiful, traditional cast iron styling. The Accentra is state-of-the-art in every way.

accentra

ADDITIONAL INFORMATION:

Please Call Afterglow Energy Center at

(203) 235 0033
Email Us

From the moment you lift the door handle you know this is a stove built to a standard far above any other cast iron pellet stove on the market. The castings are smooth and detailed and the understated appearance accents a wide range of décor styles. And with the optional cast iron hearth pad and the outside air kit, you can install an Accentra where other pellet stoves can’t go.

The Accentra has a remarkably precise temperature control system built right in so you won’t need an old-fashioned thermostat. The Harman Accentra constantly monitors room temperatures and makes automatic adjustments to the pellet feed rate and combustion air so you get even heating. It even turns itself off and on as needed.

The Accentra can burn up to a ton of pellets without the need for ash removal or cleaning. When needed, the entire stove can be cleaned in less than half an hour.

The Accentra delivers high overall efficiencies due to the unique cast iron heat exchanger. The Accentra is rated at 40,000 BTUs per hour and will typically heat 1450 square feet of living space.


Features

  • ESP Control
  • Automatic Ignition
  • Room Sensor
  • Harman Quality, Fit, & Finish
  • Fresh, Clean Design
  • Cast Iron Heat Exchanger - provides greater heat exchange surface in less space
  • Cast Iron Feeder, Patented
  • Tinted Glass Hopper Lid
  • 50 Pound Hopper Capacity
  • 102 Square Inches Of Cleaner Glass
  • Quiet Operation
  • 0-40,000 BTUs

Options

  • Enamel Finish
  • Custom Colors
  • Cast Iron Hearth Pad (28-5/8" x 24-1/16")

Specifications

  • Fuel              Bio-Mass Pellets
  • BTU Range            0 to 40,000
  • Heating Capacity            1,400 square feet
  • Hopper Capacity            50 lbs
  • Blower Size            150 cfm
  • Outside Air Size            2.375 inches
  • Fuse Rating            5 amp
  • Weight            370 lbs
  • Depth            23.2 inches
  • Height            31.5 inches
  • Width            24.6 inches
  • Feed Rate            .75 lbs per hour (minimum)
  • 4.75 lbs per hour (maximum)
  • Venting Size            3 Inch Pellet Vent Pipe

† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
 

Our Partners

 

Founded in 1979, this company had a mission to produce the finest fireplace products available anywhere. Over the years this company has grown from one employee to over 500 dedicated employees that have been honored with awards for developing the finest fireplace products in North America.

 

www.regency-fire.com

 

In 1979, Dane Harman, designed and built a stove to heat his home. It heated so well that his neighbors asked him to build one for them too. Dane agreed, and was soon so overcome with an abundance of orders, that within a short time, he outgrew the garage and decided to build what is now known as the Harman Stove Company.

 

www.harmanstoves.com

 

 

Quadra-Fire is one of the brands in the Hearth & Home Technologies family of brands. Hearth & Home Technologies is the leading producer, and with its extensive professional dealer network, the leading installer of hearth products.

 

www.quadrafire.com