|
Harman -
Pellet Stoves
|
The Harman Accentra Fireplace Insert will give you more heat, better temperature control and a level of convenience you won’t find in other pellet inserts. The Accentra’s many outstanding features make it the best value pellet insert on the market today.
ADDITIONAL INFORMATION:
Please Call Afterglow Energy Center at
(203) 235 0033
Email Us
|
The Accentra’s versatile design lets you convert a heat-wasting fireplace into an efficient heating source. The Accentra Insert could also be used to create a fireplace that doesn’t require a chimney for your home. A special zero clearance fireplace kit converts the Accentra Insert into a fireplace that can be placed in a corner or against any wall of your home. You can choose from a variety of mantels and facings that complement your home’s décor.
The Accentra’s on-board microprocessor constantly senses room temperature and automatically makes adjustments in the feed rate and air supply so you get just the right amount of heat. This remarkable technology lets you fill the hopper, set the desired temperature and walk away. The Accentra Insert lights automatically, brings the room up to the exact temperature and will turn off if no heat is required.
As with all Harman pellet stoves, maintenance is minimal and cleaning is easy. The Accentra Insert lets you burn close to a ton of pellets before ash removal is needed. The Insert Track System lets you slide the insert out of the fireplace so that it can be cleaned or serviced.
 |
Features
- Automatic Ignition
- Room Sensor
- Harman Quality, Fit, & Finish
- Accordion Heat Exchanger - provides greater heat exchange surface in less space
- Quiet Operation
- Automatic Temperature Control
- Exhaust Sensing Probe Control - Exclusive To Harman
- 57 lb Hopper Capacity
- Power Cord Can Be Placed On Either Side Of The Stove
- Harman Insert Track System For Easy Installation And Cleaning - Exclusive Of Harman
- 176 Square Inches Of Cleaner Glass
Options
- Ceramic Log Set For a Wood Fire Look
- 100% Outside Air - Exclusive To Harman
- 3 Inch Vent Pipe
- Zero Clearance Housing For Use With Wood Mantle
- Harman Built Mantel - Exclusive To Harman
- Insert Track Installation Supports
- 20" And 22" Reduced Height Hopper For Smaller Fireplace Openings Available By Special Order
- Available colors:
- Charcoal
- Forest Green
- Mojave Red
- Metallic Blue
- Black
Specifications
- Fuel Bio-Mass Pellets
- BTU Range 0 to 42,000
- Heating Capacity 1,400 square feet
- Hopper Capacity 57 lbs
- Blower Size 180 cfm
- Outside Air Size 3 inches
- Weight 450 lbs, includes surround
- Depth 29.91 inches
- Height 32.06 inches
- Width 41.78 inches
- Feed Rate .75 lbs per hour (minimum)
- 5 lbs per hour (maximum)
- Venting Size 4 inches PL pellet vent pipe standard
- 3 inches PL pellet vent pipe option with fireplace housing - see manual for installation options
- Electrical Average 255 watts
- Clearances and Dimensions
- Side Wing To Trim 0 inches
- Front Hearth Protection 6 inches
- Top Of Insert To Mantel Trim Or Ledge 12 inches
- Zero Clearance Housing (Optional) 3 inches from exhaust vent
† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
|
|
|
|
Harman -
Pellet Stoves
|
The Harman Advance Pellet Stove relies on state-of-the-art technology to automatically adjust itself to your desired room temperature. Simply pour your pellets into the convenient top-loading hopper and set the Advance’s temperature dial. If the room temperature drops below the set temperature, the Advance will light itself to increase the temperature.
ADDITIONAL INFORMATION:
Please Call Afterglow Energy Center at
(203) 235 0033
Email Us
|
Constant Comfort
After your set temperature is achieved, it is constantly monitored by a sensing probe. If the temperature in the room drops even slightly, the Advance will increase its flame level. If an outside door is opened and the room temperature drops rapidly, the Advance will increase its fire in proportion to the temperature drop. And, if the outside temperature rises and no heat is needed, the Advance will automatically shut down but continue to monitor the room temperature in case it drops again.
Harman makes choosing a pellet stove easy
Specially designed for effortless operation, the all-new Harman Advance automatically adjusts its flame level to maintain your optimum room temperature. And with an array of special features, elegant good looks and the widest heating range in the industry, the Advance makes choosing a pellet stove incredibly easy.
|
Features
- Automatic Temperature Control - eliminates warm/cold cycle
- 0 to 48,000 BTU Range
- Long Life Advance Ignition System
- Efficient Accordian Heat Exchanger
- Decorative Marble Tile Top
- Compact - depth of Advance is only 20-1/2"
- Patented Feeder and Burn Pot - Provides Long
- Easy Top Loading Design
- Oversize Ash Pan
Options
- Marble Tile Top Colors:
- cream
- light brown
- green
- black
- Realistic Log Option - Easy to Install
- Bright Nickel or Gold Plated Window Frame, Air Grille and Hopper Knob
Specifications
- Fuel Bio-Mass Pellets
- BTU Range 48,000
- Heating Capacity 1,500 square feet
- Hopper Capacity 60 lbs
- Blower Size 135 cfm
- Outside Air Size 2-3/8"
- Fuse Rating 5 amp
- Weight 250 lbs
- Depth 20-1/2"
- Height 32-1/2"
- Width 26-5/8"
- Feed Rate .75 lbs per hour (minimum)
- 6 lbs per hour (maximum)
- Floor to Center of Flue 7.75 inches
- Venting Size 3 inches Pellet Vent Pipe
- Clearances and Dimensions
- Rear 1 inch
- Side 10 inches
- Front 36 inches
† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
|
|
|
Harman -
Pellet Stoves
|
The Harman P61A Pellet Stove relies on state-of-the-art technology to automatically adjust itself to your desired room temperature. Simply pour your pellets into the convenient top-loading hopper and set the temperature dial on your P61A.
ADDITIONAL INFORMATION:
Please Call Afterglow Energy Center at
(203) 235 0033
Email Us
|
If the room is much cooler than the set temperature, the P61A will produce a large fire in order to quickly reach the desired temperature. If only a slight increase is needed, the P61A will burn a small fire. This way, no energy is wasted by overshooting your predetermined temperature level.
In addition to adjusting temperature levels, the P61A will automatically adjust itself for fuel quality. An ESP (Exhaust Sensing Probe) analyzes the output of the fuel being burned and adjusts the feed rate accordingly to increase fuel quality.
The P61 models have the widest heating range of any pellet stove. The P61A can burn any brand of wood pellet regardless of the ash content. This allows you to buy lower cost pellets and achieve the same results for less.
The P61A’s high efficiency allows you to burn less fuel to heat the same area as the competitor’s stoves. Since the stove adjusts automatically to produce the correct amount of heat, it is the best choice even if you never need 61,000 BTUs. Ash removal is quick, easy, and can be done while the stove is in operation. Normally ashes need only be removed every one to two months.
To perform annual cleaning, simply unlatch and remove the blower cover located behind the ash pan. Now the venting system can be easily cleaned with a vacuum cleaner and brush. |
Features
- ESP Control
- Room Sensor
- Patented Feeder
- Patented Burn Pot
- Large Ash Pan
- Swing Open Ash Door
- Accordion Heat Exchanger
- Air-Cooled Combustion Blower
- Super Easy Cleaning
- More than 100 Square Inches Of Glass
- P61A Automatic Ignition
Options
- Side Heat Shields
- Hopper Extension
- Ceramic Log Set For a Wood Fire Look
- Tile Pack
- Gold Door
- Gold Air Grill
Specifications
- Fuel Bio-Mass Pellets
- BTU Range 0 to 61,000
- Heating Capacity 2,000+ sq ft
- Hopper Capacity 72 lbs
- Blower Size 135 cfm
- Flue Size 3 inches
- Outside Air Size 2-3/8 inches
- Fuse Rating 5 amp
- Weight 249 lbs
- Depth 29-1/2 inches
- Height 34-1/2 inches
- Width 23-1/2 inches
† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
|
|
|
Harman -
Pellet Stoves
|
The Harman Accentra Pellet Stove is a high performance pellet stove with beautiful, traditional cast iron styling. The Accentra is state-of-the-art in every way.
ADDITIONAL INFORMATION:
Please Call Afterglow Energy Center at
(203) 235 0033
Email Us
|
From the moment you lift the door handle you know this is a stove built to a standard far above any other cast iron pellet stove on the market. The castings are smooth and detailed and the understated appearance accents a wide range of décor styles. And with the optional cast iron hearth pad and the outside air kit, you can install an Accentra where other pellet stoves can’t go.
The Accentra has a remarkably precise temperature control system built right in so you won’t need an old-fashioned thermostat. The Harman Accentra constantly monitors room temperatures and makes automatic adjustments to the pellet feed rate and combustion air so you get even heating. It even turns itself off and on as needed.
The Accentra can burn up to a ton of pellets without the need for ash removal or cleaning. When needed, the entire stove can be cleaned in less than half an hour.
The Accentra delivers high overall efficiencies due to the unique cast iron heat exchanger. The Accentra is rated at 40,000 BTUs per hour and will typically heat 1450 square feet of living space.
|
Features
- ESP Control
- Automatic Ignition
- Room Sensor
- Harman Quality, Fit, & Finish
- Fresh, Clean Design
- Cast Iron Heat Exchanger - provides greater heat exchange surface in less space
- Cast Iron Feeder, Patented
- Tinted Glass Hopper Lid
- 50 Pound Hopper Capacity
- 102 Square Inches Of Cleaner Glass
- Quiet Operation
- 0-40,000 BTUs
Options
- Enamel Finish
- Custom Colors
- Cast Iron Hearth Pad (28-5/8" x 24-1/16")
Specifications
- Fuel Bio-Mass Pellets
- BTU Range 0 to 40,000
- Heating Capacity 1,400 square feet
- Hopper Capacity 50 lbs
- Blower Size 150 cfm
- Outside Air Size 2.375 inches
- Fuse Rating 5 amp
- Weight 370 lbs
- Depth 23.2 inches
- Height 31.5 inches
- Width 24.6 inches
- Feed Rate .75 lbs per hour (minimum)
- 4.75 lbs per hour (maximum)
- Venting Size 3 Inch Pellet Vent Pipe
† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
|
|
|
Harman -
Pellet Stoves
|
The Harman Pellet Pro 38 Plus Pellet Stove is a powerful, quiet and compact stove that provides up to 38,000 BTUs in normal operation plus an additional 5,000 BTUs in Turbo mode.
ADDITIONAL INFORMATION:
Please Call Afterglow Energy Center at
(203) 235 0033
Email Us
|
This attractive stove is easily installed in tight quarters, making it the perfect choice for modular and mobile homes.
The Pellet Pro 38 Plus is incredibly simple to operate and maintain. Many colors and door styles are available, allowing you to create an addition to your home that is as eye pleasing as it is functional.
|
Features
- Accordion Heat Exchanger - provides greater heat exchange surface in less space
- Turbo Mode - allows for up to 43,000 BTU output
- Glass Door Feature - over 100 square inches of glass
- Air-Cooled Blower Housing - built into the stove to reduce size and sound, and increase efficiency
- Supersized Ash Pan - means less emptying
- Sealed Hopper - holds up to 50 lbs of pellet fuel
Options
- 24-Karat Gold Trim
- Side Heat Shields For Close Installation
- Thermostat
- Hopper Extension - adds an additional 50 lbs to hopper capacity
- Ceramic Logs For A Wood Fire Look
- Brushed Stainless, Bright Nickel, or 24-Karat Gold Door Kit
- Brushed Stainless, Bright Nickel, or 24-Karat Gold Air Grill
Specifications
- Fuel Bio-Mass Pellets
- BTU Range 7,000 to 43,000
- Heating Capacity 1,400 sq ft
- Hopper Capacity 50 lbs (100 lbs with Optional Hopper Extension)
- Blower Size 135 cfm Flue Size 3 inches
- Outside Air Size 2-3/8 inches
- Fuse Rating 3 amp
- Weight 215 lbs
- Depth 28-1/2 inches
- Minimum Floor Protection 6 in.
- Height 32 inches
- Width 22 inches
- Floor to Center of Flue 9 inches
† Heating capacity and efficiency may differ due to climate, building construction and condition, amount and quality of insulation, location of the fireplace, type of fuel used and air movement in the home. Btu output will vary, depending on the type of fuel used. Units require standard maintenance in accordance with the owner's manual.
|
|
|
|
